Author Index

A

  • Abasi, majid Using the Abrasive Wheel for Evaluation of Abrasive Behavior of Steels [Volume 21, Issue 2, 2010]
  • Abasi, s. mehdi Investigation on the Effect of Martensitic and Austenitic Structures on Two-Way Shape Memory Strain Value in Ni-Ti Alloys Trained under Bending [Volume 22, Issue 1, 2012]
  • Abbasi, majid Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2014]
  • Abbasi, Majid Effect of Aluminum Addition on the Microstructure and Mechanical Properties of High Manganese Austenitic Steel Fe-18Mn-0.6C [Volume 28, Issue 1, 2017, Pages 13-22]
  • Abbasi, sakine The Effect of Fe2O3 on Microstructure and Mechanical Properties of Foam Glass Obtained from Soda-Lime Waste Glass and SiC as Foaming Agent [Volume 24, Issue 1, 2013]
  • Abbasi, seyed mahdi The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
  • Abbasi, Seyed Mahdi The Effect of Second Hot Rolling on the Hot Ductility Behavior of IMI834 Alloy [Volume 27, Issue 2, 2016, Pages 97-110]
  • Abbasi, Seyyed Mehdi Effects of Nitrogen on Microstructure, Mechanical Properties and Corrosion Behavior in Nickel-Free Austenitic Stainless Steels [Volume 29, Issue 2, 2018, Pages 55-64]
  • Abbasi, S.Mehdi Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]
  • Abbaspour, maryam An Investigation on Mild Steel Pitting Corrosion in Concrete Pore Solution and Inhibitive Effect of Nitrite by Measuring Couple Current Density and Potential of Identical Electrodes [Volume 21, Issue 2, 2010]
  • Abbaszadeh, khodamorad Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]
  • Abdali, Nosratalah Determining the Optimal Amount of Oxide Flux in A-TIG Welding of HSLA-100 Steel [Volume 30, Issue 2, 2019, Pages 103-112]
  • Abdizadeh, hosin Recovery of INCONEL738 Superalloy from Used Gas Turbine Blades by ESR Method [Volume 23, Issue 2, 2012]
  • Abdollahi, Alireza Microstructeral characterization and mechanical properties of nonostructured Al2024 alloy and Al2024 based composites [Volume 27, Issue 1, 2016, Pages 65-80]
  • Abdollah-pour, hasan An Investigation into the Wear Behaviour of Aluminum (AA2124) Matrix Composite Reinforced with Intermetallic MoSi2 Particles [Volume 25, Issue 1, 2014]
  • Abdollahzadeh, Amir The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Abdoos, hasan A Study of Mechanical Properties and Fracture Mechanisms of Powder Metallurgy Parts Prepared using Semi Pre-alloyed Steels [Volume 24, Issue 2, 2014]
  • Abdous, hasan The Effect of Temperature and Time of Infiltration Process on the Wear esistance and Properties of WC/Cu Composite [Volume 22, Issue 1, 2012]
  • Abdous, Hosein Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Abedi, Amir An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2014]
  • Abedini, Aliakbar Effect of quenching and partitioning process on the microstructure and tensile properties of medium carbon high silicon steel [Volume 33, Issue 2, 2022, Pages 59-72]
  • Aboudzadeh, Neda Preparation of a Bilayer Coating of nHydroxyapatite/Poly(lactic-co-glycolic)acid on Mg and Investigation of Corrosion Properties and Biocompatibility [(Articles in Press)]
  • Aboutalebi, Mohammad Reza Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2015, Pages 13-26]
  • Aboutalebi, Mohammad Reza Numerical and Experimental Evaluation of Stray Grains Formation During Single Crystal Growth [Volume 28, Issue 2, 2017, Pages 13-26]
  • Aboutalebi, Mohammad-Reza Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2015, Pages 1-10]
  • Aboutalebi, Mohammad-Reza Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2015, Pages 23-36]
  • Abrahimi, Ali reza Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2013]
  • Aghaei, Alireza Effective Parameters in Synthesis and Properties of Monolithic Oxynitride Glasses Prepared by Sol-gel Method [Volume 28, Issue 1, 2017, Pages 109-118]
  • Aghajani, hosin Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Ahmadi, Alireza The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2015, Pages 37-50]
  • Ahmadi, H Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
  • Ahmadi, Hamid Predication of Hot Flow Behavior of Micro-Alloy Steel Using Modified Johnson-Cook Model [Volume 32, Issue 2, 2021, Pages 125-136]
  • Ahmadi, hosin Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2014]
  • Ahmadi, Reza Evaluation of the Microstructure and Mechanical Properties of Dissimilar Joint between Pure Copper and Stainless Steel 316 [Volume 32, Issue 2, 2021, Pages 11-26]
  • Ahmadi, Zohre Spark Plasma Sintering of ZrB2-Based Ceramic Reinforced with SiC Particles and Whiskers [Volume 32, Issue 1, 2021, Pages 33-44]
  • Ahmadpour, Ali Synthesis and Characterization of CuFe2O4 Magnetic Nanoparticles and Their Application for Removal of Reactive Red 141 from Aqueous Solution [Volume 32, Issue 2, 2021, Pages 58-70]
  • Akbari, Ehsan Investigation of the Effect of Chemical and Mechanical Parameters on the Electroplated Zinc Coating on Steel Substrate of st12 [Volume 32, Issue 1, 2021, Pages 111-124]
  • Akbari, mohamad reza Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Akbari, Mohamad Reza Investigation on the Compressive Behavior of Steel Foams Manufactured by Powder Metallurgy Route [Volume 32, Issue 1, 2021, Pages 45-56]
  • Akbari Nejad Fogh, Ali Investigation on the Compressive Behavior of Steel Foams Manufactured by Powder Metallurgy Route [Volume 32, Issue 1, 2021, Pages 45-56]
  • Akbarzadeh, Mehdi Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]
  • A. Khosroshahi, Rasol A Study on the Effect of Al2O3 Nano-particles on Aging Behavior and Mechanical Properties of Al-4.5wt.%Cu/Al2O3 Composites Produced by Stir Casting [Volume 23, Issue 2, 2012]
  • Akhtari, Faezeh Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
  • Akrami, Negar “The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
  • Alaei, Samira Investigation of the Effect of Chemical and Mechanical Parameters on the Electroplated Zinc Coating on Steel Substrate of st12 [Volume 32, Issue 1, 2021, Pages 111-124]
  • Alamolhoda, Somaye Effect of Milling Intensity of TiO2-Al Powder Mixture on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 28, Issue 2, 2017, Pages 1-12]
  • Alavi Nezhad Khalil Abad, Seyed Vahid The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
  • Albooyeh, Alireza Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
  • Alesafar, Azin The Desired Strength of Al-Si-Cu Alloy Closed Cell Foam and Its Comparing with the Strength of Ship’s Fresh Bone [Volume 33, Issue 1, 2021, Pages 25-48]
  • Aliadeh, Ali Investigating Mechanical Behavior of Al A356-B4C / TiB2 Composite Produced by Stir Casting [Volume 33, Issue 2, 2022, Pages 41-58]
  • Aliadeh, Ali Experimental Investigation Thermal and Mechanical Behavior of Ni/Al Reactive Composites Synthesized by Mechanical Alloying [Volume 33, Issue 3, 2022, Pages 37-52]
  • Aliadeh, Ali Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
  • Aliadeh, Ali Synthesis and characterization of electroless Ni-P-ZrO2-TiO2 coating on Steel substrate [Volume 34, Issue 2, 2023, Pages 67-86]
  • Aliazdeh, Mehdi Evaluation of the Wettability and Other Physical Properties of Iron Ore Particles that Consumed in the Pelletizing Plant of Mobarakeh Steel Co. [Volume 31, Issue 1, 2020, Pages 49-62]
  • Alipour, Mohammad The effect of age hardening heat treatment (T6) on the microstructure and wear behavior of Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with graphene nano plates [Volume 33, Issue 4, 2022, Pages 13-26]
  • Alipour, Mohammad Investigating the effect of the amount of reinforcement on the compressive strength of A380 aluminum alloy nanocomposite reinforced with silicon carbide nanoparticles [Volume 33, Issue 4, 2022, Pages 27-38]
  • Alipour, Mohammad Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
  • Alipour, Mohammad Investigating the microstructure and strength properties of 500 series aluminum casting alloy modified with rare earth element erbium [Volume 34, Issue 2, 2023, Pages 87-96]
  • Alipour, Mohammad Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
  • Alipour, Mohammad Investigating the wear behavior of nanocomposite based on Cu-5Zn alloy reinforced with carbon nanotubes [Volume 34, Issue 4, 2023, Pages 1-16]
  • Alipour, Mohammad Effect of aging heat treatment and extrusion process on mechanical properties of Al-3Mg-2.5Cu-xEr alloy [Volume 35, Issue 1, 2024, Pages 1-10]
  • Alipour Behzadi, Mohamad Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]
  • Alizad, Sajad Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2014]
  • Alizadeh, Ali Microstructeral characterization and mechanical properties of nonostructured Al2024 alloy and Al2024 based composites [Volume 27, Issue 1, 2016, Pages 65-80]
  • Alizadeh, Mohsen Evaluation of the Wettability and Other Physical Properties of Iron Ore Particles that Consumed in the Pelletizing Plant of Mobarakeh Steel Co. [Volume 31, Issue 1, 2020, Pages 49-62]
  • Alizadeh, Morteza Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Allahkaram, Saeed Reza Effect of Electrodeposition Parameters on Chemical Composition, Cathodic Current Efficiency, Hardness and Morphology of Zn-Ni Alloy Coatings [Volume 29, Issue 2, 2018, Pages 103-114]
  • Amini, Ahmadreza Desulfurization of Plain Carbon Steel by CaO-Al2O3-SiO2 and CaO-Al2O3-SiO2-X (X = Na2O, SrO) Synthetic Slags [Volume 24, Issue 2, 2014]
  • Amini, isa Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2013]
  • Amirjan, mostafa The Effect of Temperature and Time of Infiltration Process on the Wear esistance and Properties of WC/Cu Composite [Volume 22, Issue 1, 2012]
  • Amirjan, mostafa A Study of Mechanical Properties and Fracture Mechanisms of Powder Metallurgy Parts Prepared using Semi Pre-alloyed Steels [Volume 24, Issue 2, 2014]
  • Amir khani, Ali reza Optimization of the Processing Parameters of Pulsed TIG Welding for the Enhancement of Mechanical Properties of Welds in AZ31 Magnesium Alloy [Volume 24, Issue 1, 2013]
  • Ansariniya, Mahsa The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Arabi, hosin An Investigation of the Microstructure of Short Time Oxide Film in Al-1Mg and Al-2Mg Alloys [Volume 23, Issue 1, 2012]
  • Arabi, hosin Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2014]
  • Arabi Jeshvaghani, Rahim Influence of Cooling Rate and Copper Content on the Microstructure of Zn–27%Al Alloy under End-chill Casting [Volume 28, Issue 2, 2017, Pages 27-36]
  • Ardestani, Mohammad Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
  • Arshadi Rastabi, Shahin In-situ Composition of Al/Al3Mg2 on Al-1050 Surface by Friction Stir Processing [Volume 29, Issue 1, 2018, Pages 63-78]
  • Asadi Asadabad, Mohsen Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2014]
  • Asgary, somayeh Investigating the Performance of Amorphous W / WN Bilayer as a Cu Diffusion Barrier in Si [Volume 35, Issue 1, 2024, Pages 51-64]
  • Asghari, Ramin Effects of Fenton's Reagent on Surface Modification of Nitinol Shape Memory Alloy for Biomedical Applications [Volume 29, Issue 2, 2018, Pages 65-78]
  • Ashari Astani, Negar Thermal Fatigue Mechanism in the GG25 Gray Iron [Volume 21, Issue 1, 2010]
  • Ashnagar, Mohammad The Study of Reactions Mechanism, Microstructure and Mechanical Properties of In Situ Composite Produced In Al-V2O5 System [Volume 27, Issue 1, 2016, Pages 51-64]
  • Ashrafi, Ali The Feasibility of Producing CoCrFeMnNi High Entropy Alloy Coatings by Electrochemical Deposition Method and Its Characterization [Volume 31, Issue 2, 2020, Pages 109-120]
  • Assadi, Hamid The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Ataie, abolghasem Optimizing Vacuum Silicothermic Reduction of Calcined Dolomite [Volume 21, Issue 1, 2010]
  • Ataie, Abolghasem Pool Volume Influence on Carbon Nanotube Dispersion in Cu-Cr Matrix by Wet Ball Milling [Volume 29, Issue 1, 2018, Pages 89-98]
  • Avazkonandeh Gharavol, Mohammad Hasan The Study of Micro-segregation in Al-Cu Alloys Using Thermal Analysis and Numerical Modeling [Volume 28, Issue 1, 2017, Pages 51-72]
  • Avazkonandeh-Gharavol, mohamad hasan Effects of Chromium on the Microstructure and Inclusions of Multipass Low Alloy Steels Weld Metal in Shielded Metal Arc Welding [Volume 21, Issue 2, 2010]
  • Azadbeh, Maziyar Joining of Al-Foam to Plate in Sandwich Structures [Volume 26, Issue 1, 2015, Pages 97-104]
  • Azadbeh, Maziyar Investigation of the Deflection Behavior of CZ3000 Prealloyed Powder Beam Using In-situ Bending Technique [Volume 29, Issue 1, 2018, Pages 1-10]
  • Azadbeh, Maziyar Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Azadi, Mahboobeh Sensitivity Analysis of Heat Treatment Parameters on Cylinder-head Aluminum Alloy Properties by Regression Method [Volume 32, Issue 1, 2021, Pages 57-74]
  • Azadi, Mohammad Sensitivity Analysis of Heat Treatment Parameters on Cylinder-head Aluminum Alloy Properties by Regression Method [Volume 32, Issue 1, 2021, Pages 57-74]
  • Azadi, Mohammad Sensitivity Analysis of Ageing Parameters on Properties of AZ91 Magnesium Alloy by Regression Method [Volume 33, Issue 1, 2021, Pages 49-70]
  • Azadi, Mohammad Sensitivity Analysis of Solutioning Time, Ageing Temperature, and Clay Nano-Particles Addition on Hardness of Piston Aluminum-Silicon Alloy using Regression Method [Volume 33, Issue 4, 2022, Pages 67-94]
  • Azarbarmas, Morteza Evaluating Effects of the Gating Ratio on the Casting Quality of a Steel Pump Body Using the Simulation [Volume 35, Issue 1, 2024, Pages 23-34]
  • Azari, Rasul Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]
  • Azari Khosroshahi, rasol Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2014]
  • Azari Khosroshahi, Rasoul Friction Stir Welding of 430 Ferritic Stainless Steel [Volume 30, Issue 2, 2019, Pages 119-126]
  • Azarmehr, S. Amir An Investigation of the Microstructure of Short Time Oxide Film in Al-1Mg and Al-2Mg Alloys [Volume 23, Issue 1, 2012]
  • Azarmehr, S. Amir An Investigation into the Morphology of Short-Time Oxide Films in Molten Pure Aluminum [Volume 23, Issue 2, 2012]
  • Azghandirad, Sajad The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Azimaee, Hamid Reza On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
  • Azodi, hamed Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]
  • Azodi, hamed Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2013]

B

  • Babakhani, Abolfazl An Investigation on the Microstructure of Used First-Stage Blades of Gas Turbine and Determination of Optimum Heat Treatment Cycle for Rejuvenation of the Blades [Volume 21, Issue 1, 2010]
  • Babakhani, Abolfazl Investigation of Compressive Properties and Microstructure of Al-SiO2 Nanocomposites Produced by Ultrasonic and Stir Casting Techniques [Volume 27, Issue 2, 2016, Pages 59-68]
  • Babakhani, Abolfazl Assessment of Compressive Strength and Hardness of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold-Press and SPS [Volume 29, Issue 2, 2018, Pages 41-54]
  • Babakhani, Abolfazl Development of a Kinetic Model for Predicting the Dissolution Behavior of Activated Molybdenite by Mechanical Activation [Volume 32, Issue 1, 2021, Pages 1-18]
  • Badri, Hassan The Effect of Second Hot Rolling on the Hot Ductility Behavior of IMI834 Alloy [Volume 27, Issue 2, 2016, Pages 97-110]
  • Bagherzadeh Ghazi, Seyyed Reza Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
  • Bahmanabadi, Hamed Sensitivity Analysis of Solutioning Time, Ageing Temperature, and Clay Nano-Particles Addition on Hardness of Piston Aluminum-Silicon Alloy using Regression Method [Volume 33, Issue 4, 2022, Pages 67-94]
  • Bahmani, Mohammad Reza Numerical Simulation of Tube Extrusion Process of AISI304 and Comparing with Upper Bound Solutions [Volume 29, Issue 2, 2018, Pages 151-166]
  • Bahmani oskooee, Mehdi Investigation of the effect of copper addition on the phase equilibrium and the microstructure of 410s stainless steel [Volume 33, Issue 2, 2022, Pages 173-184]
  • Bakhtiari, Reza The Effect of Heat Treatment on Magnetic Properties of Fe78Si9B13 Amorphous Ribbons [Volume 23, Issue 2, 2012]
  • Bakhtiari-Zaman, Hassan i The effect of gas nitriding process on the corrosion behavior of TiO2 coating formed by plasma electrolytic oxidation [Volume 32, Issue 1, 2021, Pages 93-110]
  • Banapour Ghaffari, Omid Strengthening of soda-lime glasses using field-assisted ion exchange [(Articles in Press)]
  • Baniadam, Majid Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Banna, Hosein Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Banna, Hosein Rapid Heating Effects on Microstructure and Thermal Stability of a Ni3Al Base Alloy, IC221M [Volume 30, Issue 1, 2018, Pages 91-100]
  • Baradaran, javad Statistical Comparison of Fatigue Lives of Forged Ck45 Steel in Normalized, Quenched and Tempered Condition with Those in Quenched and Tempered Condition [Volume 21, Issue 2, 2010]
  • Barati Darband, Ghasem The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
  • Bayani, Hessam Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
  • Bazzaz Bonabi, Soheila Microstructure and Mechanical Properties of a Low Alloy High Carbon Steel Processed by Quenching and Partitioning Process [Volume 26, Issue 1, 2015, Pages 105-116]
  • Beidokhti, Behrooz Dissimilar Joining of Metal/Polymer Using Friction Stir Spot Welding Method [Volume 32, Issue 1, 2021, Pages 137-144]
  • Beikzadeh Noee, Saman Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]
  • Beitollahi, Ali The Effect of Bi2O3 Addition on Liquid-Liquid Phase Separation, Crystallization and Dielectric Properties of Ferroelectric Glass-Ceramics in PbO-TiO2-SiO2-B2O3 System [Volume 23, Issue 2, 2012]
  • Beitollahi, Ali The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Binesh, bhzad The Effect of Heat Treatment on Magnetic Properties of Fe78Si9B13 Amorphous Ribbons [Volume 23, Issue 2, 2012]
  • Borhani, Gholamhossein Numerical Simulation of Tube Extrusion Process of AISI304 and Comparing with Upper Bound Solutions [Volume 29, Issue 2, 2018, Pages 151-166]
  • Boutorabi, mohamad ali Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Boutorabi, Mohammad Ali Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2015, Pages 51-62]
  • Boutorabi, S.mohamad ali Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Boutorabi, S. mohamd reza Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Brzegari, mojtaba Assessment of the Slope and Cross-Section of In-Gate on the Pressure and Flow Pattern Using Finite Volume Method [Volume 22, Issue 2, 2012]

C

  • Charehkhah, reza Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2013]

D

  • Dadashnia, Kamran Effect of the Content of Graphite in the Slag Powder of the Steel LRF on the Microstructure and Properties of SAW of Ductile Iron [Volume 32, Issue 2, 2021, Pages 71-82]
  • Damadi, S.Reza Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]
  • Danesh Manesh, Hbib The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2014]
  • Daneshvar Asl, Shervin Improvement of the Photovoltaic Performance of Dye-Sensitized Solar Cell by Using TiO2:CNT Nanocomposite Photoanode [Volume 30, Issue 1, 2018, Pages 101-110]
  • Dargahi Zaboli, Maliheh One-Pot Synthesis of Hydrophobic Silica Nano Particles with Long-Chain Alcohol 1-Octadecanol [Volume 29, Issue 1, 2018, Pages 11-20]
  • Darvish, Abolfazl Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2014]
  • Darvishian Haghighi, Faezeh Characterization of the Effect of Type and Amount of Acid and Base Catalyst on the Crystallization and Morphology of Mullite Particles Synthesized by the Sol - Gel Method [Volume 32, Issue 2, 2021, Pages 149-166]
  • Darvishian Haghighi, Faezeh Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
  • Dastanpur, Esmat Study of the effect of Homogenization Treatment via Partial Melting on the Microstructure and Mechanical Properties of Austempered Ductile Iron [Volume 23, Issue 1, 2012]
  • Davami, parviz Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2014]
  • Dehghan, mehdi Study of the effect of Homogenization Treatment via Partial Melting on the Microstructure and Mechanical Properties of Austempered Ductile Iron [Volume 23, Issue 1, 2012]
  • Dehghani, Kamran Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Dehmolaei, Reza Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]
  • Dehmollaei, Reza Evaluating the microstructure and mechanical properties of dissimilar welding between austenitic stainless steel A240-TP. 316 and ferritic low alloy steel A387-Gr. 11 [Volume 27, Issue 1, 2016, Pages 23-38]
  • Dejam, Laya Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
  • Divandari, mehdi Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Divandari, mehdi Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Divandari, mehdi An Investigation of the Microstructure of Short Time Oxide Film in Al-1Mg and Al-2Mg Alloys [Volume 23, Issue 1, 2012]
  • Divandari, mehdi An Investigation into the Morphology of Short-Time Oxide Films in Molten Pure Aluminum [Volume 23, Issue 2, 2012]

E

  • Ebadi, mostafa Effect of Colloid Zirconia on Corrosion Resistance of Low Cement Alumina Mortar under Arc Furnace Slag [Volume 31, Issue 2, 2020, Pages 57-68]
  • Ebrahimi, Ali Reza Determining the Optimal Amount of Oxide Flux in A-TIG Welding of HSLA-100 Steel [Volume 30, Issue 2, 2019, Pages 103-112]
  • Ebrahimi, Amirhossein Novel High-Cycle-Life Soft Actuator Using Silicon Elastomer Matrix and Ethanol [Volume 32, Issue 2, 2021, Pages 115-124]
  • Ebrahimi, GH Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
  • Ebrahimi, gholam reza The Effect of Hot Deformation on the Microstructure of AZ91 Magnesium Alloy [Volume 23, Issue 1, 2012]
  • Ebrahimi, Gholamreza Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
  • Ebrahimi, ramin The Effect of Hot Deformation on the Microstructure of AZ91 Magnesium Alloy [Volume 23, Issue 1, 2012]
  • Ebrahimi Kahoo, Zeinab “The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
  • Ebrahiminejad, Zhaleh Investigating the effect of roughness on the tunneling and statistical properties of tantalum thin layers grown using nitrogen ions [Volume 35, Issue 1, 2024, Pages 11-22]
  • Eftekhari yekta, Bijan The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Eftekhariyekta, Bijhan Effective Parameters in Synthesis and Properties of Monolithic Oxynitride Glasses Prepared by Sol-gel Method [Volume 28, Issue 1, 2017, Pages 109-118]
  • Eftekhari Yekta, Bijan Strengthening of soda-lime glasses using field-assisted ion exchange [(Articles in Press)]
  • Emami, Masoud Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy Processed in Semi-Solid State by Means of Twin Screw [Volume 31, Issue 1, 2020, Pages 1-12]
  • Emami, mohamad Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2014]
  • Enayati, mohammad hossein Synthesis of Nanocrystalline Al3Zr Intermetallic Compound by Mechanical Alloying and Heat Treatment [Volume 26, Issue 2, 2015, Pages 11-22]
  • Entesari, Sina The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Eslami, Amir Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2014]
  • Ezatpour, hamid reza Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]

F

  • Fadaei, Amirreza Strengthening of soda-lime glasses using field-assisted ion exchange [(Articles in Press)]
  • Faeghinia, Aida Effects of Carbonates, Carbon, Chromium Oxide and SiC Compositions On Steel Slag Sintering [Volume 33, Issue 2, 2022, Pages 13-24]
  • Farahbakhsh, Iman Microstructural and Compositional Evolution of Ni-Cu Solid Solution versus Mechanical Alloying Speed during Surface Mechanical Coating (SMC) [Volume 28, Issue 2, 2017, Pages 63-82]
  • Farhadinia, Faranak Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
  • Farhangi, Hassan Effect of Electrodeposition Parameters on Chemical Composition, Cathodic Current Efficiency, Hardness and Morphology of Zn-Ni Alloy Coatings [Volume 29, Issue 2, 2018, Pages 103-114]
  • Farmanesh, Khosro Numerical Simulation of Tube Extrusion Process of AISI304 and Comparing with Upper Bound Solutions [Volume 29, Issue 2, 2018, Pages 151-166]
  • Farnia, Ali Recovery of INCONEL738 Superalloy from Used Gas Turbine Blades by ESR Method [Volume 23, Issue 2, 2012]
  • Farnoush, Hamidreza Micro-tribological Behavior of Electrophoretically Deposited HA-TiO2 Nanocomposite Coatings [Volume 29, Issue 2, 2018, Pages 137-150]
  • Fathi, Mohammadhossein The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2015, Pages 37-50]
  • Fattah-alhosseini, arash Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2014]
  • Fazel-Najafabadi, Mahmoud Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]
  • Fereidoon, Abdolhosein Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
  • Fereiduni, Eskandar The Effect of Intermetallic Compounds on the Strength of Dissimilar Friction Stir Spot Welded Al/Steel Joints [Volume 28, Issue 2, 2017, Pages 83-98]
  • Fereiduni, Eskandar Effect of Welding Parameters on Dissimilar Friction Stir Spot Welded Al-5083/St-12 Alloy Sheets [Volume 29, Issue 1, 2018, Pages 21-32]

G

  • Ghabooli, Mehdi Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]
  • Ghaderi, Mohammad Investigation of Morphology and Corrosion Behavior of Electroless Ni-P Coating on Mg-7Li Alloy with Different Pre-treatments [Volume 29, Issue 1, 2018, Pages 43-52]
  • Ghaemi, Ahad Experimental Study of Pollutant Removal Chemical Techniques in the Bayer Process [Volume 28, Issue 2, 2017, Pages 49-62]
  • Ghahvechian, Hassan Influence of Cooling Rate and Copper Content on the Microstructure of Zn–27%Al Alloy under End-chill Casting [Volume 28, Issue 2, 2017, Pages 27-36]
  • Ghanad, Mehrnoosh “The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
  • Ghanbari, mohsen Numerical and Experimental Evaluation of Stray Grains Formation During Single Crystal Growth [Volume 28, Issue 2, 2017, Pages 13-26]
  • Ghandehari, mohamad reza The Use of Eddy Current Nondestructive Test for the Quality Control of arburized Components [Volume 22, Issue 2, 2012]
  • Ghasemi, Ali The Effect of Mn Addition on Oxidation Resistance of Ti-48Al Synthesized by Mechanical Alloying [Volume 27, Issue 1, 2016, Pages 93-106]
  • Ghasemi, Sadegh The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Ghasemi, Somayeh Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Ghasemi Banadkouki, Seyed Sadegh Superior Improvement of Microstructure and Mechanical Properties of a Medium Silicon Low Alloy 35CHGSA Steel Under Quenching and Partitioning Heat Treatment in Comparison to Conventional Quenching and Tempering Condition [Volume 33, Issue 2, 2022, Pages 73-91]
  • Ghasemi Banadkouki, Seyyed Sadegh Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]
  • Ghavam, Mohammad Hadi The Effect of Second Hot Rolling on the Hot Ductility Behavior of IMI834 Alloy [Volume 27, Issue 2, 2016, Pages 97-110]
  • Ghazanfarian, Bahram Effect of the Content of Graphite in the Slag Powder of the Steel LRF on the Microstructure and Properties of SAW of Ductile Iron [Volume 32, Issue 2, 2021, Pages 71-82]
  • Gheirati, Mohammad The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2015, Pages 37-50]
  • GHEISARI DEHSHEIKH, HASSAN A Comparative study of the Effect of Adding Iron and Zirconium Oxide Nanoparticles on Microstructure and Properties of MgO-CaO Refractories [Volume 28, Issue 2, 2017, Pages 123-136]
  • Ghiasi, hasan Optimization of Effective Parameters in Welding of Low Carbon & Low Silicon Steel Plates in Hot-Dip Galvanizing Kettle [Volume 21, Issue 1, 2010]
  • Ghobeiti-Hasab, Mehdi Effect of Bainite Morphology on the Mechanical Properties of a Ferrite- Bainite- Martensite Triple-Phase Steel [Volume 30, Issue 1, 2018, Pages 55-66]
  • Ghodrati, Mehran Production and characterization of PLA/MgAl2O4 scaffolds by 3D printing method (FDM) and their comparison with slurry method [(Articles in Press)]
  • Ghorbanzadeh, Milad Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
  • Golmohammadi, Morteza Synthesis and characterization of bentonite-SnO2 nanocomposite in supercritical water environment [Volume 33, Issue 1, 2021, Pages 87-96]
  • Golmohammadi, Morteza Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
  • Golmohammadi, Morteza Investigation on the Presence of Titanium Oxide particles Effect in Preventing the Growth of NiTi Granules in the Sintering Process [Volume 33, Issue 3, 2022, Pages 11-24]
  • Goodarzi, masoud Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Goodarzi, Masoud Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2015, Pages 23-36]
  • Gopalan, Raghavan The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Gorji, abdol hamid Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]
  • Guo, Xiping Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2015, Pages 13-26]

H

  • Haddad-Sabzevar, mohsen Effects of Chromium on the Microstructure and Inclusions of Multipass Low Alloy Steels Weld Metal in Shielded Metal Arc Welding [Volume 21, Issue 2, 2010]
  • Haddad Sbzevar, Mohsen The Study of Micro-segregation in Al-Cu Alloys Using Thermal Analysis and Numerical Modeling [Volume 28, Issue 1, 2017, Pages 51-72]
  • Hadi, Morteza The Effect of Mn Addition on Oxidation Resistance of Ti-48Al Synthesized by Mechanical Alloying [Volume 27, Issue 1, 2016, Pages 93-106]
  • Haerian, Ali Effects of Chromium on the Microstructure and Inclusions of Multipass Low Alloy Steels Weld Metal in Shielded Metal Arc Welding [Volume 21, Issue 2, 2010]
  • Haghi, Seyyed Mohammad Ali The Mechanism of the Reduction of Hematite-Magnetite Concentrate by Graphite-Calcium Carbonate Mixture in Hoganas Process [Volume 32, Issue 2, 2021, Pages 45-56]
  • Hakimizad, amin Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2014]
  • Halvani-Anaraki, Elham Optimization of Process Parameters of PLGA/CS Nano-bio-camposite as Tissue Engineering Scaffold [Volume 29, Issue 2, 2018, Pages 115-126]
  • Hamedani, mohamad taghi Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Hanaei, kazem Recovery of INCONEL738 Superalloy from Used Gas Turbine Blades by ESR Method [Volume 23, Issue 2, 2012]
  • Hasani, Ali Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Hasani, Saeed The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Hasanzadeh-Sablouei, Ali Removal of Arsenic from Pregnant Leaching Solution Using Electrochemical Coagulation Method [Volume 32, Issue 2, 2021, Pages 95-114]
  • Hassanzadeh Tabrizi, Sayed Ali Fabrication and characterization of Al2O3-Y2O3 based composite [Volume 35, Issue 1, 2024, Pages 65-74]
  • Hassanzadeh-Tabrizi, S.Ali The effect of gas nitriding process on the corrosion behavior of TiO2 coating formed by plasma electrolytic oxidation [Volume 32, Issue 1, 2021, Pages 93-110]
  • Hazrati Azim, Babak Simulation of Solid Particles Mixing in a Pilot Leaching Reactor [Volume 31, Issue 1, 2020, Pages 101-110]
  • Heidari, Gholamreza Investigation of Thermal and Corrosion Behavior of a Ti-Based Bulk Metallic Glass with Composition of (Ti41Zr25Be28Fe6)93Cu7 [Volume 32, Issue 2, 2021, Pages 83-94]
  • Heidari, hosin Statistical Comparison of Fatigue Lives of Forged Ck45 Steel in Normalized, Quenched and Tempered Condition with Those in Quenched and Tempered Condition [Volume 21, Issue 2, 2010]
  • Heidari, Mohamad Predication of Hot Flow Behavior of Micro-Alloy Steel Using Modified Johnson-Cook Model [Volume 32, Issue 2, 2021, Pages 125-136]
  • Heidari Boroujeni, Homeyra Effect of Ceria on Phase Behavior and Photocatalytic Properties of Colloidal and Polymeric Nano-Titania [Volume 30, Issue 1, 2018, Pages 111-120]
  • Heidarzadeh, Akbar Friction Stir Welding of Monel 400: Microstructure, Substructure, and Mechanical Properties [Volume 31, Issue 2, 2020, Pages 45-56]
  • Hejazi, jalal Using the Abrasive Wheel for Evaluation of Abrasive Behavior of Steels [Volume 21, Issue 2, 2010]
  • Hejazi, jalal Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2014]
  • Hejazi, Seyedsina Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
  • Helali, Vesal Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
  • Herzer, Giselher The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Heshmati Manesh, said Optimizing Vacuum Silicothermic Reduction of Calcined Dolomite [Volume 21, Issue 1, 2010]
  • Hojati, Milad Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Honarbakhsh Raouf, abbas Structure, Microstructure, Magnetic, Electromagnetic and Dielectric Properties of Nanostructured Mn–Zn Ferrite Synthesized through Glycine-Nitrate Combustion Process [Volume 29, Issue 2, 2018, Pages 167-182]
  • Honarbakhsh Raouf, Abbas Microstructure and Mechanical Properties of a Low Alloy High Carbon Steel Processed by Quenching and Partitioning Process [Volume 26, Issue 1, 2015, Pages 105-116]
  • Hono, Kazuhiro The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Hosini pour, S. jamal Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2013]
  • Hosseini, Sayed Rahman The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]
  • Hosseini, Seyed Morteza Characterization of the Effect of Type and Amount of Acid and Base Catalyst on the Crystallization and Morphology of Mullite Particles Synthesized by the Sol - Gel Method [Volume 32, Issue 2, 2021, Pages 149-166]
  • Hosseini, S. hojatol lahi Assessment of Aluminum Nanopowder Reactivity Behavior Produced by Evapora-tion - Condensation Method under Air Atmosphere [Volume 21, Issue 2, 2010]
  • Hosseinian Naeini, Ali Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
  • Hosseini pour, Seyyed Jamal Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]
  • Hosseinipour, s. jamal Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]

I

  • Imani, Rana Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2015, Pages 69-84]
  • Irannajad, Mehdi Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]

J

  • Jafari, maryam Evaluation of Microstructure, Phase Composition and Properties of Four Layer Zirconia Coating on API5L Steel as a Function of Different Sintering Condition [Volume 29, Issue 2, 2018, Pages 79-90]
  • Jafari, Sahar The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Jafarpoor, sara Influence of the solution heat treatment on the behavior of γ′ precipitates and microhardness of dendrite core and inter-dendritic regions of cast superalloy GTD-111 [Volume 32, Issue 1, 2021, Pages 19-32]
  • Jafarzadegan, Mostafa Evaluation of the Microstructure and Mechanical Properties of Dissimilar Joint between Pure Copper and Stainless Steel 316 [Volume 32, Issue 2, 2021, Pages 11-26]
  • Jahangiri, Mohammadreza Effect of laser line interruption on the structure and magnetic properties of GO-silicon-steel-sheets in the laser scribing process [Volume 33, Issue 2, 2022, Pages 147-160]
  • Jalaly, misam Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 21, Issue 2, 2010]
  • Jamili shirvan, Zahra Investigation of Thermal and Corrosion Behavior of a Ti-Based Bulk Metallic Glass with Composition of (Ti41Zr25Be28Fe6)93Cu7 [Volume 32, Issue 2, 2021, Pages 83-94]
  • Javdaneh, Foad Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
  • Javidi, Mehdi Investigating the Mechanical Strength and Degradation of Bone Scaffold Fabricated from Hydroxyapatite and Polyurethane Foam [Volume 29, Issue 1, 2018, Pages 79-88]
  • Jazayeri Gharehbagh, Ali The Effect of Heat Treatment on Magnetic Properties of Fe78Si9B13 Amorphous Ribbons [Volume 23, Issue 2, 2012]
  • Johari, Narges Bioactivity Comparison of Silk Fibroin/Nano-Titanium Dioxide and Silk Fibroin/Nano-Titanium Dioxide Containing Flour Ions for Bone Tissue Engineering [Volume 32, Issue 1, 2021, Pages 75-84]
  • Johari, Narges Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
  • Johari, Narges Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
  • Jolagah, Ali Investigating the Mechanical Strength and Degradation of Bone Scaffold Fabricated from Hydroxyapatite and Polyurethane Foam [Volume 29, Issue 1, 2018, Pages 79-88]

K

  • Kafashan, Hosein Optimization of effective parameters on oxidation resistance of ZrB2 ceramics [Volume 31, Issue 1, 2020, Pages 37-48]
  • Kahrobaee, Zahra The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Kalaee, Mohammad Reza Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
  • Kalantar, Mahdi Influence of the solution heat treatment on the behavior of γ′ precipitates and microhardness of dendrite core and inter-dendritic regions of cast superalloy GTD-111 [Volume 32, Issue 1, 2021, Pages 19-32]
  • Kalantar, Mehdi The Study of Reactions Mechanism, Microstructure and Mechanical Properties of In Situ Composite Produced In Al-V2O5 System [Volume 27, Issue 1, 2016, Pages 51-64]
  • Kamran Haghighi, Hossein Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]
  • Karamian, Ebrahim Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]
  • Karami Dastenaee, Vahid Investigation of Retained Austenite to Martensite Phase Transformation on Wear Behavior of White Cast Irons [Volume 29, Issue 2, 2018, Pages 19-28]
  • Karbakhsh Ravari, zahra The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2015, Pages 99-108]
  • Kargozar, Saeid “The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
  • Karimi, Hadi The Effect of Mn Addition on Oxidation Resistance of Ti-48Al Synthesized by Mechanical Alloying [Volume 27, Issue 1, 2016, Pages 93-106]
  • Karimi Zarchi, hamid reza Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 21, Issue 2, 2010]
  • Karimi Zarchi, Hamid Reza Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 22, Issue 1, 2012]
  • Karimi Zarchi, Hamid Reza Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2015, Pages 13-26]
  • Karimi Zarchi, Hamid Reza Pyrometallurgical Recovery of Metallic Zinc from Galvanizing Dust by Using Ammonium Chloride Flux [Volume 30, Issue 1, 2018, Pages 155-163]
  • Karimi Zarchi, Hamid Reza Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]
  • Kasaeian, Fatemezahra Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
  • Kebriyaei, Amir Fabrication and Study of Wear Properties of AA8090 Composite Reinforced with SiC Particles after Precipitation Hardening with Directional Quenching [Volume 28, Issue 1, 2017, Pages 87-98]
  • Keshavarz Alamdari, Eskandar The Effect of Number and Width of Baffles on Mixing Time in Copper Solvent Extraction Dynamic Mixers: CFD Simulation and Direct Photography [Volume 30, Issue 2, 2019, Pages 113-118]
  • Khaje Ali, Mohammad Javad Quasi Static Compressive Behavior of Al-Si-SiC-xFe Foam Filled Crash Boxes [Volume 27, Issue 2, 2016, Pages 9-24]
  • Khajeh Mahmoodi, Sahar Investigation of microstructure and mechanical properties of dissimilar joints between AISI 321 stainless steel and X65 high-strength low-alloy steel [Volume 33, Issue 1, 2021, Pages 71-86]
  • Khaksar, Emad Effect of Synthesis Temperature on Photocatalytic Activity of TiO2 Nanoparticles Prepared via Solvothermal Method [Volume 27, Issue 2, 2016, Pages 25-34]
  • Khalil Allafi, jafar Study of Effective Parameters of Coating on Internal Pores in Cast Iron Parts Produced by Lost-Foam Casting [Volume 24, Issue 1, 2013]
  • Khalil Allafi, Jafar Effects of Fenton's Reagent on Surface Modification of Nitinol Shape Memory Alloy for Biomedical Applications [Volume 29, Issue 2, 2018, Pages 65-78]
  • Khani, Somayeh Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Kharaji, Arezoo 3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
  • Kharrazi, uosef Using the Abrasive Wheel for Evaluation of Abrasive Behavior of Steels [Volume 21, Issue 2, 2010]
  • Kharrazi, yousef Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2014]
  • Khavandi, Alireza The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2015, Pages 99-108]
  • Khavandi, Alireza Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2015, Pages 109-117]
  • Khavandi, Alireza Preparation of a Bilayer Coating of nHydroxyapatite/Poly(lactic-co-glycolic)acid on Mg and Investigation of Corrosion Properties and Biocompatibility [(Articles in Press)]
  • Khayyat, Masoumeh Investigating the effect of brazing time and temperature on stainless steel sandwich joints [Volume 33, Issue 4, 2022, Pages 53-66]
  • Kheirandish, shahram Using the Abrasive Wheel for Evaluation of Abrasive Behavior of Steels [Volume 21, Issue 2, 2010]
  • Kheirandish, shahram Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]
  • Kheirandish, shahram Effect of the Number of Nodular Graphite Particles per unit Area on the Distribution of Hard Phase in Ferritie-Martensite Dual-Phase Ductile iron [Volume 23, Issue 1, 2012]
  • Kheirandish, shahram Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2014]
  • Kheirandish, Shahram Effect of Aluminum Addition on the Microstructure and Mechanical Properties of High Manganese Austenitic Steel Fe-18Mn-0.6C [Volume 28, Issue 1, 2017, Pages 13-22]
  • Kheirandish, Shahram Effects of Nitrogen on Microstructure, Mechanical Properties and Corrosion Behavior in Nickel-Free Austenitic Stainless Steels [Volume 29, Issue 2, 2018, Pages 55-64]
  • Khoshhal, Razieh Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2015, Pages 51-62]
  • Khoshhal, Razieh Thermodynamic and practical study of iron silicon phases that can be produced from iron and silicon powder systems [Volume 33, Issue 2, 2022, Pages 161-172]
  • Khoshhal, Razieh The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
  • Kianirashid, alireza Investigation of Aluminosilicate Crystallization behavior in SiO2-Al2O3 System [Volume 31, Issue 1, 2020, Pages 122-134]
  • Kiani-Rashid, ali reza The influence of Al content on the Fe-C-Al-Si equilibrium phase diagrams [Volume 21, Issue 1, 2010]
  • Kiani-Rashid, Alireza Characterization of Apatite Glass-Ceramic Coatings on Ti-6Al-4V Substrate by Sol-Gel Method for Medical Application [Volume 30, Issue 2, 2019, Pages 91-102]
  • Kokabi, Amir Hossein Effect of Welding Parameters on Dissimilar Friction Stir Spot Welded Al-5083/St-12 Alloy Sheets [Volume 29, Issue 1, 2018, Pages 21-32]
  • Kokabi, Amir-Hossein The Effect of Intermetallic Compounds on the Strength of Dissimilar Friction Stir Spot Welded Al/Steel Joints [Volume 28, Issue 2, 2017, Pages 83-98]
  • Korgel, Brain One-Pot Synthesis of Hydrophobic Silica Nano Particles with Long-Chain Alcohol 1-Octadecanol [Volume 29, Issue 1, 2018, Pages 11-20]

L

  • Lakzaei, morteza Effect of the Number of Nodular Graphite Particles per unit Area on the Distribution of Hard Phase in Ferritie-Martensite Dual-Phase Ductile iron [Volume 23, Issue 1, 2012]

M

  • Madaah Hosseini, Hamid Reza Bioactivity Comparison of Silk Fibroin/Nano-Titanium Dioxide and Silk Fibroin/Nano-Titanium Dioxide Containing Flour Ions for Bone Tissue Engineering [Volume 32, Issue 1, 2021, Pages 75-84]
  • Madanipour, hosin Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Maghrebi, Morteza Electrochemical Functionalization of Graphene in an Extensive Range of Electrical Power [Volume 30, Issue 1, 2018, Pages 1-12]
  • Mahdavian, Mohammad Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2014]
  • Mahmoodan, Morteza Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Mahmoodi, Niyaz Mohammad Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
  • Mahmoodi, Vahid Synthesis and Characterization of CuFe2O4 Magnetic Nanoparticles and Their Application for Removal of Reactive Red 141 from Aqueous Solution [Volume 32, Issue 2, 2021, Pages 58-70]
  • Mahmoodi Hashemi, Peyman Corrosion Behavior of Ti-6Al-4V Implant Coated with a Tantalum Nanolayer for Medical Applications [Volume 27, Issue 2, 2016, Pages 47-58]
  • Mahmoodi Hashemi, Pyman Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2015, Pages 69-84]
  • Mahmoudi, Mehrdad Dissimilar Joining of Metal/Polymer Using Friction Stir Spot Welding Method [Volume 32, Issue 1, 2021, Pages 137-144]
  • Mahmoudian, Mostafa Experimental Study of Pollutant Removal Chemical Techniques in the Bayer Process [Volume 28, Issue 2, 2017, Pages 49-62]
  • Majidi, Saeed Effect of Aluminum Addition on the Microstructure and Mechanical Properties of High Manganese Austenitic Steel Fe-18Mn-0.6C [Volume 28, Issue 1, 2017, Pages 13-22]
  • Majidian, maryam Effect of Cooling Rate and H2 Gas on the Inter-Dendritic Distance and Mechanical Properties of Composite [Volume 21, Issue 1, 2010]
  • Maleknejad, zohre Structure, Microstructure, Magnetic, Electromagnetic and Dielectric Properties of Nanostructured Mn–Zn Ferrite Synthesized through Glycine-Nitrate Combustion Process [Volume 29, Issue 2, 2018, Pages 167-182]
  • Mansourinejad, mostafa Analytical Evaluation of the Effect of Die and Punch Profile Radii on Deep Drawing Force [Volume 23, Issue 1, 2012]
  • Mansourinejad, mostafa A Study of the Flow Behaviour of a Nb-V-Ti Microalloyed Steel during Hot Compression Test [Volume 25, Issue 1, 2014]
  • Mansourinejad, Mostafa Study of Texture and Warm Flow Stress of a Microalloyed Steel Due to Static Softening During Hot Deformation [Volume 29, Issue 2, 2018, Pages 183-201]
  • Mardi, Hossein Effects of Carbonates, Carbon, Chromium Oxide and SiC Compositions On Steel Slag Sintering [Volume 33, Issue 2, 2022, Pages 13-24]
  • Marghussian, vahak Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Mashreghi, ali reza Investigating the Influence of Type and Amount of Reinforcement Particles and Processing Parameters on the Micro Structure and Mechanical Properties of Aluminum Matrix Composites [Volume 21, Issue 2, 2010]
  • Mashreghi, Alireza The Study of Reactions Mechanism, Microstructure and Mechanical Properties of In Situ Composite Produced In Al-V2O5 System [Volume 27, Issue 1, 2016, Pages 51-64]
  • Mashreghi, Alireza The Effect of Interaction Between Hardness, Inclusion and Microstructures on the Fatigue Behavior of Steel [Volume 28, Issue 1, 2017, Pages 23-36]
  • Mashreghi, Alireza Influence of the solution heat treatment on the behavior of γ′ precipitates and microhardness of dendrite core and inter-dendritic regions of cast superalloy GTD-111 [Volume 32, Issue 1, 2021, Pages 19-32]
  • Masroor, Maryam Pool Volume Influence on Carbon Nanotube Dispersion in Cu-Cr Matrix by Wet Ball Milling [Volume 29, Issue 1, 2018, Pages 89-98]
  • Mazinani, Mohammad Influence of Cold Rolling on Austenite Formation in Plain Low-Carbon Steel Annealed in Intercritical Region [Volume 28, Issue 2, 2017, Pages 37-48]
  • Mazinani, Mohammad The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Mehrabi kali, Milad Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]
  • Mehri, Ali The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]
  • Mehri, Fatemeh Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2 [Volume 30, Issue 1, 2018, Pages 67-78]
  • Mirbagheri, Seyyed Mohammad Hossein Quasi Static Compressive Behavior of Al-Si-SiC-xFe Foam Filled Crash Boxes [Volume 27, Issue 2, 2016, Pages 9-24]
  • Mirbagheri, S.mohamad hosin Assessment of the Slope and Cross-Section of In-Gate on the Pressure and Flow Pattern Using Finite Volume Method [Volume 22, Issue 2, 2012]
  • Mirbagheri., Seyyed mohammad hossein The Desired Strength of Al-Si-Cu Alloy Closed Cell Foam and Its Comparing with the Strength of Ship’s Fresh Bone [Volume 33, Issue 1, 2021, Pages 25-48]
  • Mirdamadi, Shamsaldin The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2015, Pages 99-108]
  • Mirdamadi, Shamseddin Fabrication and Study of Wear Properties of AA8090 Composite Reinforced with SiC Particles after Precipitation Hardening with Directional Quenching [Volume 28, Issue 1, 2017, Pages 87-98]
  • Mirdamadi, Shamseddin Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Mirdamadi, shamsodin A Model Based on Pull-out Mechanism of M23C6 Particles in Matrix of 1.2542 Tool Steel for Estimation of Toughness and Strength [Volume 27, Issue 1, 2016, Pages 39-50]
  • Mirdamadi Tehrani, Shamsoddin Effect of Duration of Deep Cryogenic Treatment on Microstructure and T ensile properties of 1.2542 tool steel [Volume 29, Issue 2, 2018, Pages 1-18]
  • Mirhabibi, Ali reza Modeling the Effect of the Most Important Factors on the Kinetics Behavior of Silicon Nitration Reaction Based on Group Method of Data Handling [Volume 32, Issue 2, 2021, Pages 27-44]
  • Mirhabibi, Alireza synthesis of a special enamel for Nickel-Chrome resistor and characterizing the viscosity and surface tension [Volume 26, Issue 1, 2015, Pages 85-96]
  • Miri, Ahmad Evaluation of the Microstructure and Mechanical Properties of Dissimilar Joint between Pure Copper and Stainless Steel 316 [Volume 32, Issue 2, 2021, Pages 11-26]
  • Mirjalili, Mostafa Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Mirjalili, Mostafa The Mechanism of the Reduction of Hematite-Magnetite Concentrate by Graphite-Calcium Carbonate Mixture in Hoganas Process [Volume 32, Issue 2, 2021, Pages 45-56]
  • Mirjalili, Mostafa On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
  • Mirjalili, Mostafa The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
  • Mirjalili, Mostafa Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
  • Mirjani, Masoud Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
  • Mirkarimi, Seyed Hossein Evaluating the microstructure and mechanical properties of dissimilar welding between austenitic stainless steel A240-TP. 316 and ferritic low alloy steel A387-Gr. 11 [Volume 27, Issue 1, 2016, Pages 23-38]
  • Mirkazemi, S. mohamad The Effect of Bi2O3 Addition on Liquid-Liquid Phase Separation, Crystallization and Dielectric Properties of Ferroelectric Glass-Ceramics in PbO-TiO2-SiO2-B2O3 System [Volume 23, Issue 2, 2012]
  • Mirkazemi, S.mohamad The effect of Temperature and SiC Content on the Properties and Microstructure of Foam Glasses obtained from the Wasted Cathode Ray Tube Display Panels [Volume 23, Issue 1, 2012]
  • Mirsalehi, Seyyed Ehsan Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Mirzaei, mehdi The Effect of Velocity of the Melt Entering the Die Cavity on Fracture Toughness of AZ91 Magnesium Alloy [Volume 23, Issue 2, 2012]
  • Mirzakhani, bahman Analytical Evaluation of the Effect of Die and Punch Profile Radii on Deep Drawing Force [Volume 23, Issue 1, 2012]
  • Mirzakhani, bahman A Study of the Flow Behaviour of a Nb-V-Ti Microalloyed Steel during Hot Compression Test [Volume 25, Issue 1, 2014]
  • Mirzakhani, Bahman Study of Texture and Warm Flow Stress of a Microalloyed Steel Due to Static Softening During Hot Deformation [Volume 29, Issue 2, 2018, Pages 183-201]
  • Moaveni, Sahar Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
  • Moayed, mohamad hadi An Investigation on Mild Steel Pitting Corrosion in Concrete Pore Solution and Inhibitive Effect of Nitrite by Measuring Couple Current Density and Potential of Identical Electrodes [Volume 21, Issue 2, 2010]
  • Moayed, Mohammad hadi Investigation of the Pitting Corrosion Behavior of 403 Martensitic Stainless Steel in Bromide and Iodide Solutions [Volume 29, Issue 2, 2018, Pages 91-102]
  • Moghaddam, Javad Zinc Recovery from Direct Leaching Sulfide Concentrate Residue in Pilot Scale [Volume 31, Issue 2, 2020, Pages 15-24]
  • Moghaddam Matin, Maryam Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
  • Mohaghegh Nejad, Saeid Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]
  • Mohamadizadeh, Mina Preparation of a Bilayer Coating of nHydroxyapatite/Poly(lactic-co-glycolic)acid on Mg and Investigation of Corrosion Properties and Biocompatibility [(Articles in Press)]
  • Mohammadi, Ali Investigating the effect of the amount of reinforcement on the compressive strength of A380 aluminum alloy nanocomposite reinforced with silicon carbide nanoparticles [Volume 33, Issue 4, 2022, Pages 27-38]
  • Mohammadi, Ehsan The Increase in the Wear Resistance of Copper Substrate Coated by Cu-Al2O3 Nanocomposite Through Solution Combustion Method [Volume 32, Issue 2, 2021, Pages 1-10]
  • Mohammadi Moqaddam, Mahsa The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
  • Mohammad Sadeghi, Bagher Simulation of the Microstructural Evolution of AA6061 in Equal Channel Angular Pressing Using Monte Carlo Method [Volume 28, Issue 1, 2017, Pages 37-50]
  • Mohammadzadeh, Ahad Investigation of the Deflection Behavior of CZ3000 Prealloyed Powder Beam Using In-situ Bending Technique [Volume 29, Issue 1, 2018, Pages 1-10]
  • Mohammadzadeh, Ahad Compacting Pressure Effect on Densification in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder [Volume 30, Issue 2, 2019, Pages 140-149]
  • Mohseni, M. synthesis of a special enamel for Nickel-Chrome resistor and characterizing the viscosity and surface tension [Volume 26, Issue 1, 2015, Pages 85-96]
  • Mohsenzadeh, Meymanat Influence of Cold Rolling on Austenite Formation in Plain Low-Carbon Steel Annealed in Intercritical Region [Volume 28, Issue 2, 2017, Pages 37-48]
  • Mojaver, Vahid Synthesis and Characterization of CuFe2O4 Magnetic Nanoparticles and Their Application for Removal of Reactive Red 141 from Aqueous Solution [Volume 32, Issue 2, 2021, Pages 58-70]
  • Mojtahedi, Milad Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2015, Pages 23-36]
  • Mokhtari Shirazabad, Mehdi Sensitivity Analysis of Ageing Parameters on Properties of AZ91 Magnesium Alloy by Regression Method [Volume 33, Issue 1, 2021, Pages 49-70]
  • Molaei Nejad, Esmaeil Fabrication of Fe/TiC Surface Composite on Carbon Steel Using SMAW Process [Volume 30, Issue 2, 2019, Pages 57-66]
  • Mollaei, Mohammad Hasan Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
  • Mollazadeh, Sahar The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Mollazadeh, Sahar Characterization of the Effect of Type and Amount of Acid and Base Catalyst on the Crystallization and Morphology of Mullite Particles Synthesized by the Sol - Gel Method [Volume 32, Issue 2, 2021, Pages 149-166]
  • Mollazadeh Beidokhti, Sahar Investigation of the Pitting Corrosion Behavior of 403 Martensitic Stainless Steel in Bromide and Iodide Solutions [Volume 29, Issue 2, 2018, Pages 91-102]
  • Mollazadeh Beidokhti, Sahar Characterization of Apatite Glass-Ceramic Coatings on Ti-6Al-4V Substrate by Sol-Gel Method for Medical Application [Volume 30, Issue 2, 2019, Pages 91-102]
  • Momeni, Amir Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
  • Momeni, hosin Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]
  • Monir Vaghefi, Sayed Mahmoud The Feasibility of Producing CoCrFeMnNi High Entropy Alloy Coatings by Electrochemical Deposition Method and Its Characterization [Volume 31, Issue 2, 2020, Pages 109-120]
  • Monir Vaghefi, Seyyed Mahmoud Investigation of Morphology and Corrosion Behavior of Electroless Ni-P Coating on Mg-7Li Alloy with Different Pre-treatments [Volume 29, Issue 1, 2018, Pages 43-52]
  • Moosavirad, Seyed Morteza Removal of Arsenic from Pregnant Leaching Solution Using Electrochemical Coagulation Method [Volume 32, Issue 2, 2021, Pages 95-114]
  • Moradi Yazdi, Negin Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Moradpur, Ehsan Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]
  • Morakabati, Maryam The Effect of Second Hot Rolling on the Hot Ductility Behavior of IMI834 Alloy [Volume 27, Issue 2, 2016, Pages 97-110]
  • Morakabati, Maryam Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]
  • Mortezayi, samira The Effect of Interaction Between Hardness, Inclusion and Microstructures on the Fatigue Behavior of Steel [Volume 28, Issue 1, 2017, Pages 23-36]
  • Mosallaee, Masoud Influence of the solution heat treatment on the behavior of γ′ precipitates and microhardness of dendrite core and inter-dendritic regions of cast superalloy GTD-111 [Volume 32, Issue 1, 2021, Pages 19-32]
  • Mosallaee Pour, masod Study of the effect of Homogenization Treatment via Partial Melting on the Microstructure and Mechanical Properties of Austempered Ductile Iron [Volume 23, Issue 1, 2012]
  • Mosallaee Pour, Masoud In-situ Composition of Al/Al3Mg2 on Al-1050 Surface by Friction Stir Processing [Volume 29, Issue 1, 2018, Pages 63-78]
  • Mosallaiee pour, masoud Optimization of Effective Parameters in Welding of Low Carbon & Low Silicon Steel Plates in Hot-Dip Galvanizing Kettle [Volume 21, Issue 1, 2010]
  • Mosalman, Sina Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites [Volume 33, Issue 1, 2021, Pages 107-124]
  • Moshksar, mohamad mohsen Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2014]
  • Moshksar, Mohammad Mohsen The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2014]
  • Moshrefifar, masoud Optimization of Preliminary Treatment on the Surface of Boron Nitride Particles for Ni-P Electroless Coating [Volume 23, Issue 2, 2012]
  • Moshrefifar, masoud Manufacturing A356 Aluminum Alloy/Hexagonal Boron Nitride Composite and Evaluation of its Mechanical Properties [Volume 24, Issue 2, 2014]
  • Moshrefifar, Masoud Production and Characterization of an Aluminum Based Nanocomposite Reinforced With Particles from the Al-Zr System by Means of Mechanical Alloying Process [Volume 27, Issue 2, 2016, Pages 69-82]
  • Moslemi, mohsen Numerical Evaluation of the Effect of Forming Velocity on Forming Limit Diagram (FLD) of St14 Steel using Bifurcation Theory and Comparison with Experimental Results [Volume 24, Issue 1, 2013]
  • Mostaan, Hossein Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]
  • Movahedi, Mojtaba The Effect of Intermetallic Compounds on the Strength of Dissimilar Friction Stir Spot Welded Al/Steel Joints [Volume 28, Issue 2, 2017, Pages 83-98]
  • Movahedi, Mojtaba Effect of Welding Parameters on Dissimilar Friction Stir Spot Welded Al-5083/St-12 Alloy Sheets [Volume 29, Issue 1, 2018, Pages 21-32]

N

  • Naebi, bhzad An Investigation into the Morphology of Short-Time Oxide Films in Molten Pure Aluminum [Volume 23, Issue 2, 2012]
  • NaeemAbadi, Javad The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Naghavi, Nadia 3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
  • Naghizadeh, Rahim Synthesis Calcium Zirconate with Ceramic Method [Volume 27, Issue 1, 2016, Pages 1-10]
  • Naghizadeh, Rahim Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Naimi-Jamal, Mohammad-reza Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2015, Pages 109-117]
  • Najaf zade, Ali asghar Optimization of Effective Parameters in Welding of Low Carbon & Low Silicon Steel Plates in Hot-Dip Galvanizing Kettle [Volume 21, Issue 1, 2010]
  • Nakhaee, Mohammadreza Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
  • Naserian Nik, Ali Mohamad Investigation on the Compressive Behavior of Steel Foams Manufactured by Powder Metallurgy Route [Volume 32, Issue 1, 2021, Pages 45-56]
  • Naserian-Nik, Ali Mohammad Investigation of the mechanical properties of stainless steel foams manufactured through leachable spherical urea granules as a space holder [(Articles in Press)]
  • Nasiri, Hadi Development of a Kinetic Model for Predicting the Dissolution Behavior of Activated Molybdenite by Mechanical Activation [Volume 32, Issue 1, 2021, Pages 1-18]
  • Nasiri, Hadi The Increase in the Wear Resistance of Copper Substrate Coated by Cu-Al2O3 Nanocomposite Through Solution Combustion Method [Volume 32, Issue 2, 2021, Pages 1-10]
  • Nasiri, Hadi Synthesis and characterization of bentonite-SnO2 nanocomposite in supercritical water environment [Volume 33, Issue 1, 2021, Pages 87-96]
  • Nasiri, Hadi Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method [Volume 33, Issue 1, 2021, Pages 145-156]
  • Nasiri, Hadi Investigation on the Presence of Titanium Oxide particles Effect in Preventing the Growth of NiTi Granules in the Sintering Process [Volume 33, Issue 3, 2022, Pages 11-24]
  • Nasiri, Hadi Effects of Al2O3 Particles on Mechanical Properties of Lead Foams [(Articles in Press)]
  • Nasirian, mohsen A Study of the Flow Behaviour of a Nb-V-Ti Microalloyed Steel during Hot Compression Test [Volume 25, Issue 1, 2014]
  • Nasirpour, Zeinab Selective Extraction of Copper from Nickel by D2EHPA in the Presence of Tartaric Acid and Sodium Acetate Additives [Volume 30, Issue 2, 2019, Pages 1-8]
  • Nategh, saeed Investigation of Failure Behavior of W/ (Zr55Cu30Al10Ni5)100-xNbx Composites during Compression Test [Volume 30, Issue 1, 2018, Pages 131-140]
  • Nategh, Said Effect of Duration of Deep Cryogenic Treatment on Microstructure and T ensile properties of 1.2542 tool steel [Volume 29, Issue 2, 2018, Pages 1-18]
  • Nayebpashaee, Nasim Finite Element Simulation of Temperature Distribution and Residual Stresses in New Thermal Barrier Coating La2Zr2O7/8YSZ [Volume 28, Issue 2, 2017, Pages 99-112]
  • Nayyeri, Mohammad Javad Quasi Static Compressive Behavior of Al-Si-SiC-xFe Foam Filled Crash Boxes [Volume 27, Issue 2, 2016, Pages 9-24]
  • Nazarnezhad, Simin “The Effect of Chemical Composition on Sintering Process and Microstructural, Mechanical, and Biological Properties of Hydroxyapatite/Borate Glass Composites” [Volume 33, Issue 2, 2022, Pages 111-132]
  • Nekouee, khan ali Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Nemati, Ali Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2013]
  • Nemati, ziyarat ali Study of Corrosion Behavior of MgO-Cr2O3 Refractories under the Influence of Cement Clinker [Volume 22, Issue 1, 2012]
  • NEMATI, ALI A Comparative study of the Effect of Adding Iron and Zirconium Oxide Nanoparticles on Microstructure and Properties of MgO-CaO Refractories [Volume 28, Issue 2, 2017, Pages 123-136]
  • Norbakhsh, Mehrdad The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]
  • Norouzifard, Vahid Effects of precipitation hardening heat treatment conditions on the microstructure, mechanical properties, and electrical conductivity of Cu - 0.4%Cr alloy [Volume 33, Issue 2, 2022, Pages 25-40]
  • N. Vahidi, narges Crystal and Phase Evolution of Sol-Gel Derived Hydroxyapatite Synthesis with Various Ca/P Ratios [Volume 27, Issue 2, 2016, Pages 83-96]

O

  • Ohkubo, Tadakatsu The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2015, Pages 85-98]
  • Ojaghi-Ilkhchi, Mehdi Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
  • Ostovan, Farhad Microstructure and Mechanical Properties of A283 Steel Coated by Inconel 625 and 347 Steel Using GTAW [Volume 33, Issue 1, 2021, Pages 125-144]
  • Otroj, sasan Study of Corrosion Behavior of MgO-Cr2O3 Refractories under the Influence of Cement Clinker [Volume 22, Issue 1, 2012]
  • Oudbashi, omid Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2014]

P

  • Pahlavanshamesi, mohmmadreza Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
  • Pakdell Noghabi, Hossein Assessment of Compressive Strength and Hardness of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold-Press and SPS [Volume 29, Issue 2, 2018, Pages 41-54]
  • Parnian, Mina Fabrication and Characterization of Polycaprolacton/ Gelatin/ Chitosan Scaffold by Dual Electrospinning Method [(Articles in Press)]
  • Pashangeh, Shima Investigation of Abnormal Mechanical Behaviour of a Low Alloy Spring Steel containing 0.5wt%C-1.7wt%Si Under Bainitic- Martensitic- Retained Austenitic Condition [Volume 31, Issue 2, 2020, Pages 137-152]
  • Passandideh Fard, mohamad Modeling the Thermal Spray Process for the Formation of Surface Coatings using the Stochastic Methods [Volume 23, Issue 1, 2012]
  • Phazeli, L Effects of Fabrication Parameters on Phase Composition, Densification and Mechanical Properties of Aluminum-Alumina Cermets [Volume 24, Issue 1, 2013]
  • Piadeh, fatemh An Investigation into the Wear Behaviour of Aluminum (AA2124) Matrix Composite Reinforced with Intermetallic MoSi2 Particles [Volume 25, Issue 1, 2014]
  • Pirnajmoddin, Hamid Influence of Cooling Rate and Copper Content on the Microstructure of Zn–27%Al Alloy under End-chill Casting [Volume 28, Issue 2, 2017, Pages 27-36]
  • Pirouzmanesh, Ghasem Fatigue Properties of Inconel 625 Alloy Parts Manufactured by Wire Arc Additive Manufacturing Method [Volume 32, Issue 2, 2021, Pages 137-148]
  • Pour, Masoud Effects of Cooling Methods of Grinding on the Surface Characteristics and Microstructural Evaluations [(Articles in Press)]
  • Pourabbas, Behzad One-Pot Synthesis of Hydrophobic Silica Nano Particles with Long-Chain Alcohol 1-Octadecanol [Volume 29, Issue 1, 2018, Pages 11-20]
  • Pour-Ali, Sadegh Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]

R

  • Radmehr, Parisa Effect of Milling Intensity of TiO2-Al Powder Mixture on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 28, Issue 2, 2017, Pages 1-12]
  • Rafati, Fatemeh Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
  • Rafiaei, Seyed Mahdi Study of Addition of Tetraethyl Orthosilicate (TEOS) on Microstructure and Iuminescence Properties of Nanoparticles of Y2O3: Tb3+ Phosphor Materials [Volume 31, Issue 2, 2020, Pages 129-136]
  • Rafiaei, Seyed Mahdi Production and characterization of PLA/MgAl2O4 scaffolds by 3D printing method (FDM) and their comparison with slurry method [(Articles in Press)]
  • Rafiei, Mahdi Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]
  • Rafiei, Mahdi Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process [Volume 30, Issue 2, 2019, Pages 21-30]
  • Rahimi, Ahmad The Effect of Heat Treatment on the Microstructure of Cast Ni-based IN100 Superalloy [Volume 28, Issue 1, 2017, Pages 1-12]
  • Rahmatian, Behrooz Investigation of Metallurgical Structure and Mechanical Properties of Double-Sided Friction Stir Welded joint of AA5083 Plates [Volume 31, Issue 1, 2020, Pages 89-100]
  • Rajabi, Mohammad Effect of Tantalum Oxide Addition on Hydrogen Treatment of Magnesium Hydride Nano-Composite Produced by Mechanical Alloying [Volume 31, Issue 2, 2020, Pages 81-94]
  • Rajabi, Reza Effects of Cooling Methods of Grinding on the Surface Characteristics and Microstructural Evaluations [(Articles in Press)]
  • Rajabloo, Mohamad Javad Simulation of Wear Behavior of AISI 4130 Steel Against Al2O3 Ball [Volume 30, Issue 1, 2018, Pages 141-154]
  • Rajabzadeh, Ghadir Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2013]
  • Ramezani, Amir Hoshang Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
  • Ranjbar, Khalil Effect of heat input on microstructure and mechanical properties of A7020-T6 alloy joined by TIG welding [Volume 31, Issue 1, 2020, Pages 135-148]
  • Ranjbar, Khalil Thermodynamically Prediction of in-Situ Al3Ti, Al3Zr Aluminides Formation in Friction Stir Processing Based on Effective Gibbs Free Energy Change of Formation (〖"∆G" 〗^"e" ) Model [Volume 31, Issue 2, 2020, Pages 1-14]
  • Rash-Ahmadi, Samrand Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites [Volume 33, Issue 1, 2021, Pages 107-124]
  • Rashchi, Fereshteh Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]
  • Rasooli, ali Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Rasouli, Maryam Fabrication of Polysulfone/Chitosan/Polyvinyl Alcohol Composite by Electrospinning Method and Investigation of Its Morphology [Volume 32, Issue 1, 2021, Pages 85-92]
  • Rastegari, Saied Investigation of Oxidation Properties of YSZ with Al2O3/YAG Composite Thermal Barrier Coating [Volume 30, Issue 2, 2019, Pages 31-42]
  • Rastegary, Habibollah Effect of quenching and partitioning process on the microstructure and tensile properties of medium carbon high silicon steel [Volume 33, Issue 2, 2022, Pages 59-72]
  • Rasti, javad Evaluation of Grain Size Distribution during Grain Growth in AISI 304H, 316L and 321 Austenitic Stainless Steels [Volume 22, Issue 2, 2012]
  • Raygan, shahram Recovery of INCONEL738 Superalloy from Used Gas Turbine Blades by ESR Method [Volume 23, Issue 2, 2012]
  • Raygan, shahram Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2 [Volume 30, Issue 1, 2018, Pages 67-78]
  • Razavi, Seyed Soroush e din The Effect of Number and Width of Baffles on Mixing Time in Copper Solvent Extraction Dynamic Mixers: CFD Simulation and Direct Photography [Volume 30, Issue 2, 2019, Pages 113-118]
  • Razavi, S. hosin Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]
  • Razavi, S. hosin The Effect of Velocity of the Melt Entering the Die Cavity on Fracture Toughness of AZ91 Magnesium Alloy [Volume 23, Issue 2, 2012]
  • Rezaei, Alireza Synthesis Calcium Zirconate with Ceramic Method [Volume 27, Issue 1, 2016, Pages 1-10]
  • Rezaei Ashtiani, Hamidreza Predication of Hot Flow Behavior of Micro-Alloy Steel Using Modified Johnson-Cook Model [Volume 32, Issue 2, 2021, Pages 125-136]
  • Rezaei Ashtiani, Hamidreza Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
  • Rezaei Soulegani, Sanaz Fabrication of Polysulfone/Chitosan/Polyvinyl Alcohol Composite by Electrospinning Method and Investigation of Its Morphology [Volume 32, Issue 1, 2021, Pages 85-92]
  • Rezaie, Hamid Reza Synthesis Calcium Zirconate with Ceramic Method [Volume 27, Issue 1, 2016, Pages 1-10]
  • Rezaie, Hamid Reza Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Rohani Bastami, Tahereh Synthesis and Characterization of CuFe2O4 Magnetic Nanoparticles and Their Application for Removal of Reactive Red 141 from Aqueous Solution [Volume 32, Issue 2, 2021, Pages 58-70]
  • Ronaghi, S. Amin The Study of Graphitization Process in Hypereutectoid Steel CK100 [Volume 22, Issue 2, 2012]
  • Roshani, mohsen Evaluating the microstructure and mechanical properties of dissimilar welding between austenitic stainless steel A240-TP. 316 and ferritic low alloy steel A387-Gr. 11 [Volume 27, Issue 1, 2016, Pages 23-38]

S

  • Saadatifar, hamid reza The Effect of Velocity of the Melt Entering the Die Cavity on Fracture Toughness of AZ91 Magnesium Alloy [Volume 23, Issue 2, 2012]
  • Sadegh Hassani, sedighe Control of Particle Size and Concentration of Colloidal Silica Formed via Cation Exchange Resin by Water Glass Solution [Volume 24, Issue 2, 2014]
  • Sadeghi, Mohsen The Effect of Mn Addition on Oxidation Resistance of Ti-48Al Synthesized by Mechanical Alloying [Volume 27, Issue 1, 2016, Pages 93-106]
  • Sadeghi, Nima Simulation of Solid Particles Mixing in a Pilot Leaching Reactor [Volume 31, Issue 1, 2020, Pages 101-110]
  • Sadeghi, Nima Zinc Recovery from Direct Leaching Sulfide Concentrate Residue in Pilot Scale [Volume 31, Issue 2, 2020, Pages 15-24]
  • Sadeghzadeh-Attar, Abbas Dielectric Properties of Nanostructured Bi4Ti3O12 and Bi12TiO20 Films Prepared by Sol-Gel Method [Volume 30, Issue 1, 2018, Pages 29-42]
  • Sadooghi, faezeh The Effect of Bi2O3 Addition on Liquid-Liquid Phase Separation, Crystallization and Dielectric Properties of Ferroelectric Glass-Ceramics in PbO-TiO2-SiO2-B2O3 System [Volume 23, Issue 2, 2012]
  • Sadrnezhaad, SK Improvement of the Photovoltaic Performance of Dye-Sensitized Solar Cell by Using TiO2:CNT Nanocomposite Photoanode [Volume 30, Issue 1, 2018, Pages 101-110]
  • Sadrnezhaad, S. khatibolaslam Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2015, Pages 41-52]
  • Saebnoori, Ehsan The effect of gas nitriding process on the corrosion behavior of TiO2 coating formed by plasma electrolytic oxidation [Volume 32, Issue 1, 2021, Pages 93-110]
  • Saeid, Tohid Friction Stir Welding of 430 Ferritic Stainless Steel [Volume 30, Issue 2, 2019, Pages 119-126]
  • Safaei, Hamed Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Safaie, Jvad Novel High-Cycle-Life Soft Actuator Using Silicon Elastomer Matrix and Ethanol [Volume 32, Issue 2, 2021, Pages 115-124]
  • Safari, mehdi Prediction of Forming Limit Diagrams (FLD) and Forming Limit Stress Diagrams (FLSD) for Aluminum Alloy 3105 with Finite Element Method using Ductile Fracture Criteria [Volume 22, Issue 1, 2012]
  • Safarkhanian, mohamad ali Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Saffar, Keivan Investigation of the Pitting Corrosion Behavior of 403 Martensitic Stainless Steel in Bromide and Iodide Solutions [Volume 29, Issue 2, 2018, Pages 91-102]
  • Saghafian, hasan Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel [Volume 22, Issue 2, 2012]
  • Saghafian, Hassan Fabrication and Study of Wear Properties of AA8090 Composite Reinforced with SiC Particles after Precipitation Hardening with Directional Quenching [Volume 28, Issue 1, 2017, Pages 87-98]
  • Sahebian, Samane Novel High-Cycle-Life Soft Actuator Using Silicon Elastomer Matrix and Ethanol [Volume 32, Issue 2, 2021, Pages 115-124]
  • Sahebian, Samane Design and Characterization of Electrically Driven-Bioinspired Soft Actuator based on Silicon- Ethanol Composite [Volume 32, Issue 2, 2021, Pages 167-182]
  • Sahebian, Samane Synthesis and characterization of cobalt ferrite magnetic nanoparticles by chemical co-precipitation method [Volume 33, Issue 4, 2022, Pages 1-12]
  • Sahebian, ُSamane The Study of Fatigue Behavior of Glass Fiber Reinforced epoxy(GFRP) Composite Under Different Stress Levels [Volume 33, Issue 2, 2022, Pages 1-12]
  • Sahebian, Samaneh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Sahebian saghi, Samaneh Dissimilar Joining of Metal/Polymer Using Friction Stir Spot Welding Method [Volume 32, Issue 1, 2021, Pages 137-144]
  • Sahraei, Eghbal One-Pot Synthesis of Hydrophobic Silica Nano Particles with Long-Chain Alcohol 1-Octadecanol [Volume 29, Issue 1, 2018, Pages 11-20]
  • Sahraei, Masood Investigation of the mechanical properties of stainless steel foams manufactured through leachable spherical urea granules as a space holder [(Articles in Press)]
  • Saiedi, mina The effect of Temperature and SiC Content on the Properties and Microstructure of Foam Glasses obtained from the Wasted Cathode Ray Tube Display Panels [Volume 23, Issue 1, 2012]
  • Sajjadi, Abdolkarim On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
  • Sajjadi, seyed abdolkarim Synthesis and characterization of cobalt ferrite magnetic nanoparticles by chemical co-precipitation method [Volume 33, Issue 4, 2022, Pages 1-12]
  • Sajjadi, Seyed Abdolkarim An Investigation on the Microstructure of Used First-Stage Blades of Gas Turbine and Determination of Optimum Heat Treatment Cycle for Rejuvenation of the Blades [Volume 21, Issue 1, 2010]
  • Sajjadi, Seyed Abdolkarim Assessment of Compressive Strength and Hardness of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold-Press and SPS [Volume 29, Issue 2, 2018, Pages 41-54]
  • Sajjadi, Seyed Abdolkarim Superior Improvement of Microstructure and Mechanical Properties of a Medium Silicon Low Alloy 35CHGSA Steel Under Quenching and Partitioning Heat Treatment in Comparison to Conventional Quenching and Tempering Condition [Volume 33, Issue 2, 2022, Pages 73-91]
  • Sajjadi, Seyed Abdolkarim Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
  • Sajjadi, Seyed Abdolkarim Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
  • Salahi, Esmail Effect of Colloid Zirconia on Corrosion Resistance of Low Cement Alumina Mortar under Arc Furnace Slag [Volume 31, Issue 2, 2020, Pages 57-68]
  • Salahinejad, Erfan Effect of Current Density on Properties of Ni-Cu/Al2O3 Composite Coatings [Volume 31, Issue 1, 2020, Pages 13-26]
  • Salahshouriuri, Fatemeh The effect of gas nitriding process on the corrosion behavior of TiO2 coating formed by plasma electrolytic oxidation [Volume 32, Issue 1, 2021, Pages 93-110]
  • Salehi, Akram Investigation of Compressive Properties and Microstructure of Al-SiO2 Nanocomposites Produced by Ultrasonic and Stir Casting Techniques [Volume 27, Issue 2, 2016, Pages 59-68]
  • Salehi, Mohammad Taghi Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Salehi, Seyyed Mohsen Effects of Nitrogen on Microstructure, Mechanical Properties and Corrosion Behavior in Nickel-Free Austenitic Stainless Steels [Volume 29, Issue 2, 2018, Pages 55-64]
  • Salehifar, Mehran Effect of Intercritical Annealing Temperature on the Tensile Behavior of JIS-SAPH440 Steel [Volume 33, Issue 3, 2022, Pages 25-36]
  • Samadi, Ahad Anodic Dissolution of Used Nickel-Base Superalloy U-500 in Sulfate Media for Recycling of Ni, Co and Cr [Volume 33, Issue 3, 2022, Pages 67-82]
  • Samadikuchaksaraei, Ali Bioactivity Comparison of Silk Fibroin/Nano-Titanium Dioxide and Silk Fibroin/Nano-Titanium Dioxide Containing Flour Ions for Bone Tissue Engineering [Volume 32, Issue 1, 2021, Pages 75-84]
  • Sameie, Soheil Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2015, Pages 63-74]
  • Samie zafarghandi, Mahdi Influence of Hot-working and Solution Annealing on Microstructure and Mechanical Properties of Haynes 188 [Volume 31, Issue 1, 2020, Pages 77-88]
  • Samim Banihashem, Hamid Reza Study of Dynamic Precipitation during Severe Plastic Deformation of Cast AZ91 Alloy and Its Influence on Microstructure and Mechanical Properties [Volume 30, Issue 2, 2019, Pages 9-20]
  • Samimi, Abdorreza Effect of Synthesis Temperature on Photocatalytic Activity of TiO2 Nanoparticles Prepared via Solvothermal Method [Volume 27, Issue 2, 2016, Pages 25-34]
  • Sarfaraz, Mahla On the morphology of nano-composite powder of Ni-NiO produced by solution combustion synthesis [Volume 33, Issue 1, 2021, Pages 157-182]
  • Sarpoolaky, Hossein Effective Parameters in Synthesis and Properties of Monolithic Oxynitride Glasses Prepared by Sol-gel Method [Volume 28, Issue 1, 2017, Pages 109-118]
  • SarPoolaky, hosin Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO [Volume 22, Issue 2, 2012]
  • Sattari, Mohammadali Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2015, Pages 109-117]
  • Sazegaran, Hamid Comparison on Porosity Percent, Microstructure and Compression Behavior of Steel Foams Containing 2 wt. % Cu and 2 wt. % P [Volume 31, Issue 1, 2020, Pages 63-76]
  • Sazegaran, Hamid Investigation on the Compressive Behavior of Steel Foams Manufactured by Powder Metallurgy Route [Volume 32, Issue 1, 2021, Pages 45-56]
  • Sazegaran, Hamid Investigation of the mechanical properties of stainless steel foams manufactured through leachable spherical urea granules as a space holder [(Articles in Press)]
  • Sazegaran, Hamid Effects of Al2O3 Particles on Mechanical Properties of Lead Foams [(Articles in Press)]
  • Sazegaran, Hamid Effects of Cooling Methods of Grinding on the Surface Characteristics and Microstructural Evaluations [(Articles in Press)]
  • Sedghi, Arman Effect of nano clay and carbon nano-tube on the glass fiber- epoxy hybrid composites [Volume 33, Issue 1, 2021, Pages 1-14]
  • Seifoddini, Amir The Effect of Ni Addition on the Microstructure and Glass Forming Ability of Fe-Mo-P-C-B Bulk Amorphous Alloy [Volume 31, Issue 2, 2020, Pages 35-44]
  • Seifollahi, Masumeh The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
  • Seyedein, Seyed Hossein Simulation of the Microstructural Evolution of AA6061 in Equal Channel Angular Pressing Using Monte Carlo Method [Volume 28, Issue 1, 2017, Pages 37-50]
  • Shabestari, Saeed Numerical and Experimental Evaluation of Stray Grains Formation During Single Crystal Growth [Volume 28, Issue 2, 2017, Pages 13-26]
  • Shabestari, said Effects of Nitrogen and Vacuum Atmospheres and Addition of Tin on the Densification of Al-Cu-Mg pre-alloyed Powder During Supersolidus Liquid-Phase Sintering [Volume 22, Issue 2, 2012]
  • Shafiee Afarani, mahdi Effect of Synthesis Temperature on Photocatalytic Activity of TiO2 Nanoparticles Prepared via Solvothermal Method [Volume 27, Issue 2, 2016, Pages 25-34]
  • Shafiee Afarani, Mahdi Fatigue Properties of Inconel 625 Alloy Parts Manufactured by Wire Arc Additive Manufacturing Method [Volume 32, Issue 2, 2021, Pages 137-148]
  • Shahedi Asl, Mehdi Spark Plasma Sintering of ZrB2-Based Ceramic Reinforced with SiC Particles and Whiskers [Volume 32, Issue 1, 2021, Pages 33-44]
  • Shahhosseini, shahrohk Experimental Study of Pollutant Removal Chemical Techniques in the Bayer Process [Volume 28, Issue 2, 2017, Pages 49-62]
  • Shahmiri, mohamad A kinematical Dislocation Based Model and Admissible Velocity Field for rediction of Nanostructural Changes and Mechanical Properties of Al-Cu-Al Laminated Composite During ECAE Process [Volume 22, Issue 1, 2012]
  • Shahmohamadi, Ehsan Modeling the Effect of the Most Important Factors on the Kinetics Behavior of Silicon Nitration Reaction Based on Group Method of Data Handling [Volume 32, Issue 2, 2021, Pages 27-44]
  • Shahverdi, hamid reza Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt [Volume 22, Issue 1, 2012]
  • Shahverdi, hamid Reza Effect of Ambient Atmosphere and the Rate of Heating on the Behavior of Thermal Decomposition Titanium Hydride (TiH2) Powder [Volume 21, Issue 1, 2010]
  • Shahverdi, Hamid Reza Influence of Cooling Rate and Copper Content on the Microstructure of Zn–27%Al Alloy under End-chill Casting [Volume 28, Issue 2, 2017, Pages 27-36]
  • Shalchian, Hossein Development of a Kinetic Model for Predicting the Dissolution Behavior of Activated Molybdenite by Mechanical Activation [Volume 32, Issue 1, 2021, Pages 1-18]
  • Sharifi, Mohammad jafar Sensitivity Analysis of Heat Treatment Parameters on Cylinder-head Aluminum Alloy Properties by Regression Method [Volume 32, Issue 1, 2021, Pages 57-74]
  • Sharifitabar, Mahmood Fatigue Properties of Inconel 625 Alloy Parts Manufactured by Wire Arc Additive Manufacturing Method [Volume 32, Issue 2, 2021, Pages 137-148]
  • Sharifitabar, Mahmood Investigation of microstructure and mechanical properties of dissimilar joints between AISI 321 stainless steel and X65 high-strength low-alloy steel [Volume 33, Issue 1, 2021, Pages 71-86]
  • Sharifitabar, Mahmood Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
  • Shariyari, Raziyeh Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
  • Shayegh borujeni, Behruz Investigation of the Effect of Chemical and Mechanical Parameters on the Electroplated Zinc Coating on Steel Substrate of st12 [Volume 32, Issue 1, 2021, Pages 111-124]
  • Shaykh Amiri, misam The Use of Eddy Current Nondestructive Test for the Quality Control of arburized Components [Volume 22, Issue 2, 2012]
  • Sheibani, Saeed Pool Volume Influence on Carbon Nanotube Dispersion in Cu-Cr Matrix by Wet Ball Milling [Volume 29, Issue 1, 2018, Pages 89-98]
  • Sheibani, Saeed Optimization of Effective Parameters on Copper Bioleaching from Low-Garde Sulfide Ore from Shahrbabak Copper Complex [Volume 31, Issue 2, 2020, Pages 95-108]
  • Sheibani, saide Assessment of Aluminum Nanopowder Reactivity Behavior Produced by Evapora-tion - Condensation Method under Air Atmosphere [Volume 21, Issue 2, 2010]
  • Sherafat, Zahra Fabrication of Polysulfone/Chitosan/Polyvinyl Alcohol Composite by Electrospinning Method and Investigation of Its Morphology [Volume 32, Issue 1, 2021, Pages 85-92]
  • Shirali, Abdollah Microstructure and Mechanical Properties of a Low Alloy High Carbon Steel Processed by Quenching and Partitioning Process [Volume 26, Issue 1, 2015, Pages 105-116]
  • S. Hosseini, fatemeh Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2015, Pages 63-74]
  • Solati, mhran Synthesis of the HA/YSZ Nanocomposite to Enhance GIC Fluoride Release [Volume 24, Issue 1, 2013]
  • Soleymani, Farzad Evaluation of biodegradability and electrochemical behavior of magnesium-aluminum alloy AZ91 with bio-nanocomposite membrane [Volume 33, Issue 4, 2022, Pages 39-52]
  • Soleymani, Farzad Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
  • Soleymani, Farzad Effect of rolling direction and groove geometry on impact behaviour of AA6061 and AA 7020 aluminum alloys [Volume 35, Issue 1, 2024, Pages 35-50]
  • Soleymani, Hadi Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
  • Solimani, s. mohamad yaser Investigating the Influence of Type and Amount of Reinforcement Particles and Processing Parameters on the Micro Structure and Mechanical Properties of Aluminum Matrix Composites [Volume 21, Issue 2, 2010]
  • Soltani, Saeed Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
  • Soltanieh, mansor Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 21, Issue 2, 2010]
  • Soltanieh, mansor Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel [Volume 22, Issue 1, 2012]
  • Soltanieh, Mansor Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics [Volume 22, Issue 1, 2012]
  • Soltanieh, Mansour Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2015, Pages 13-26]
  • Soltanieh, Mansour Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2015, Pages 51-62]
  • Soltanieh, Mansour Thermodynamics and Kinetics of Immersion Behavior of IC221M Alloy as a Separator in Molten Carbonate Fuel Cell [Volume 30, Issue 1, 2018, Pages 43-54]
  • Soltanieh, Mansour Rapid Heating Effects on Microstructure and Thermal Stability of a Ni3Al Base Alloy, IC221M [Volume 30, Issue 1, 2018, Pages 91-100]
  • Souri, Dariush Synthesis and study of the pH effect on the antibacterial activity of ZnSe nanoparticles against the Escherichia coli and Pseudomonas aeruginosa gram-negative bacteria by using disc-diffusion bioassay [Volume 33, Issue 1, 2021, Pages 15-24]

T

  • Tadayonsaidi, Mehran Investigation Of Spot Welding In Similar Joins Of Martensitic Advanced High Strength Steels (AHSS) [Volume 31, Issue 2, 2020, Pages 69-80]
  • Tafreshi, Mahshid Effect of Electrodeposition Parameters on Chemical Composition, Cathodic Current Efficiency, Hardness and Morphology of Zn-Ni Alloy Coatings [Volume 29, Issue 2, 2018, Pages 103-114]
  • Taghizadeh Tabrizi, Arvin Joining of Al-Foam to Plate in Sandwich Structures [Volume 26, Issue 1, 2015, Pages 97-104]
  • Taheri, Mansoureh Simulation of the Microstructural Evolution of AA6061 in Equal Channel Angular Pressing Using Monte Carlo Method [Volume 28, Issue 1, 2017, Pages 37-50]
  • Tajer Kajinebaf, Vahideh Effect of Ceria on Phase Behavior and Photocatalytic Properties of Colloidal and Polymeric Nano-Titania [Volume 30, Issue 1, 2018, Pages 111-120]
  • Taji, Iman Investigation of the Pitting Corrosion Behavior of 403 Martensitic Stainless Steel in Bromide and Iodide Solutions [Volume 29, Issue 2, 2018, Pages 91-102]
  • Talafi Noghani, Mohammad Evaluation of the Microstructure and Mechanical Properties of Dissimilar Joint between Pure Copper and Stainless Steel 316 [Volume 32, Issue 2, 2021, Pages 11-26]
  • Talebi, Amir Effect of Bainite Morphology on the Mechanical Properties of a Ferrite- Bainite- Martensite Triple-Phase Steel [Volume 30, Issue 1, 2018, Pages 55-66]
  • Talebian, Milad Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid [Volume 30, Issue 2, 2019, Pages 127-138]
  • Tavakkoli Dehaghi, Omid Dissimilar Joint Properties of Cu to 304 Stainless Steel by GTAW Process [Volume 30, Issue 2, 2019, Pages 21-30]
  • Tavakolian Akbari, Masoud The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses [Volume 32, Issue 1, 2021, Pages 125-136]
  • Tavakoli Khorasani, Masoomeh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Tavoosi, Majid The Effect of Low Temperature Austempering on Microstructure, Mechanical and Wear Properties of AISI 52100 Steel [Volume 30, Issue 1, 2018, Pages 13-28]
  • Tayarani Najaran, Zahra Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation [Volume 33, Issue 3, 2022, Pages 53-66]
  • Teimoory, Farzaneh Developing Phase Diagrams for Nano Binary Systems by MATLAB [Volume 31, Issue 2, 2020, Pages 121-130]
  • Teymourtas, Ali reza Modeling the Thermal Spray Process for the Formation of Surface Coatings using the Stochastic Methods [Volume 23, Issue 1, 2012]
  • Torabi, shahla The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2014]
  • Torabi Parizi, Masumeh Development of a Kinetic Model for Predicting the Dissolution Behavior of Activated Molybdenite by Mechanical Activation [Volume 32, Issue 1, 2021, Pages 1-18]

V

  • Vaezifar, Sedigheh Optimization of Process Parameters of PLGA/CS Nano-bio-camposite as Tissue Engineering Scaffold [Volume 29, Issue 2, 2018, Pages 115-126]
  • Vafaeenezhad, Hossein Finite Element Simulation of Temperature Distribution and Residual Stresses in New Thermal Barrier Coating La2Zr2O7/8YSZ [Volume 28, Issue 2, 2017, Pages 99-112]
  • Vahdat, Seyed Ebrahim A Model Based on Pull-out Mechanism of M23C6 Particles in Matrix of 1.2542 Tool Steel for Estimation of Toughness and Strength [Volume 27, Issue 1, 2016, Pages 39-50]
  • Vahdat, Seyed Ebrahim Effect of Duration of Deep Cryogenic Treatment on Microstructure and T ensile properties of 1.2542 tool steel [Volume 29, Issue 2, 2018, Pages 1-18]
  • Vahdat, Seyed Ebrahim Effect of the Content of Graphite in the Slag Powder of the Steel LRF on the Microstructure and Properties of SAW of Ductile Iron [Volume 32, Issue 2, 2021, Pages 71-82]
  • Vahdati Khaki, Jalil The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion [Volume 33, Issue 2, 2022, Pages 93-110]
  • Vahdatkhah, Parisa Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2015, Pages 41-52]
  • Valefi, zeia Assessment of Aluminum Nanopowder Reactivity Behavior Produced by Evapora-tion - Condensation Method under Air Atmosphere [Volume 21, Issue 2, 2010]
  • Valefi, Zia Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
  • Valibeygloo, Nasibe A Study on the Effect of Al2O3 Nano-particles on Aging Behavior and Mechanical Properties of Al-4.5wt.%Cu/Al2O3 Composites Produced by Stir Casting [Volume 23, Issue 2, 2012]
  • Vaseghi Jahromi, Mohammad Rahim Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2015, Pages 63-74]

W

  • Wang, Jin Tao The Effects of Tool Rotational Speed on the Microstructure and Mechanical Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet [Volume 30, Issue 1, 2018, Pages 79-90]

Y

  • Yadollahi, mehdi An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2014]
  • Yousef sani, S. mohamd reza An Investigation on the Microstructure of Used First-Stage Blades of Gas Turbine and Determination of Optimum Heat Treatment Cycle for Rejuvenation of the Blades [Volume 21, Issue 1, 2010]

Z

  • Zabett, ahad Statistical Comparison of Fatigue Lives of Forged Ck45 Steel in Normalized, Quenched and Tempered Condition with Those in Quenched and Tempered Condition [Volume 21, Issue 2, 2010]
  • Zabett, Ahad The Mechanism of the Reduction of Hematite-Magnetite Concentrate by Graphite-Calcium Carbonate Mixture in Hoganas Process [Volume 32, Issue 2, 2021, Pages 45-56]
  • Zabett, Ahad The Study of Fatigue Behavior of Glass Fiber Reinforced epoxy(GFRP) Composite Under Different Stress Levels [Volume 33, Issue 2, 2022, Pages 1-12]
  • Zadali Mohammad Kotiyani, Mojtaba Thermodynamically Prediction of in-Situ Al3Ti, Al3Zr Aluminides Formation in Friction Stir Processing Based on Effective Gibbs Free Energy Change of Formation (〖"∆G" 〗^"e" ) Model [Volume 31, Issue 2, 2020, Pages 1-14]
  • Zakeri, Alireza Effect of Milling Intensity of TiO2-Al Powder Mixture on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 28, Issue 2, 2017, Pages 1-12]
  • Zakeri, Alireza Microstructural and Compositional Evolution of Ni-Cu Solid Solution versus Mechanical Alloying Speed during Surface Mechanical Coating (SMC) [Volume 28, Issue 2, 2017, Pages 63-82]
  • Zamani Moghadam, Pejman Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
  • Zamyad, Hojat Novel High-Cycle-Life Soft Actuator Using Silicon Elastomer Matrix and Ethanol [Volume 32, Issue 2, 2021, Pages 115-124]
  • Zamyad, Hojat 3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
  • Zandrahimi, Morteza Investigation of the Tribological Properties of MoS2/Ni Composite Coatings Produced by Magnetron Sputtering [Volume 31, Issue 2, 2020, Pages 25-34]
  • Zare, Ahmad The Effect of Mn Addition on Oxidation Resistance of Ti-48Al Synthesized by Mechanical Alloying [Volume 27, Issue 1, 2016, Pages 93-106]
  • Zarebidaki, Arman Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2015, Pages 1-10]
  • Zare Bidaki, Arman Corrosion Behavior of Ti-6Al-4V Implant Coated with a Tantalum Nanolayer for Medical Applications [Volume 27, Issue 2, 2016, Pages 47-58]
  • Zarghani, fateme Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
  • Zebarjad, Seyed Mojtaba Investigation of Compressive Properties and Microstructure of Al-SiO2 Nanocomposites Produced by Ultrasonic and Stir Casting Techniques [Volume 27, Issue 2, 2016, Pages 59-68]
  • Zebarjad, S.M. Fabrication and Characterization of Polycaprolacton/ Gelatin/ Chitosan Scaffold by Dual Electrospinning Method [(Articles in Press)]
  • Zebarjad, S. mojtaba Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2014]
  • Zohari, Faezeh Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method [Volume 33, Issue 1, 2021, Pages 97-106]
  • Zolriasatein, ashgan Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2014]